Boat Owner
"This product is such a great finish on my yacht, also the Quick Sand compound is the best product for removing oxidation."
Starke · SiO2 sealant
Starke Hyper Hold Pro SiO2 Polymer Sealant
MDSC Pros: up to 25% off select brands & 20% off padsApply → · or visit one of 12 store locations
Mix & match quantity discounts on abrasives & applicators, for every customer
Mariners Club: $10 in points when you join + 3% back in pointsJoin →
Shipping: Free over $200, $7 flat under $200. Ships same day before 2pm ET Mon–FriDetails →
- Authorized dealer
- Pro support: 800-248-6130
Description
WARNING: This product can expose you to chemicals including ethylbenzene, cumene, naphthalene and formaldehyde, which are known to the State of California to cause cancer, and methanol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Hyper Hold Pro is a powerful crème based polymer that uses sophisticated SiO2 resins and UV blockers to lock on and protect your marine paint or gelcoat from extreme UV. Down in the hot Florida sun we've seen up to 3-6 months of durability on average. Hyper Hold Pro is extremely easy to use. Residual removal of the product is a breeze. The formula can be applied in warm and cold climates.
We recommend laying down a thin coat of Hyper Hold Pro with a DA polisher and foam pad on speed 1/2. The thinner you can lay the coat, the easier it will be to remove by hand with a microfiber. When you tend to apply by hand with an applicator, the material will lay down more thick and become more difficult to remove by hand.
Shipping
- Free UPS Ground on orders over $200
- $7 flat rate on orders under $200
- Same-day shipping on orders placed before 2pm ET, Mon–Fri (business days)
- Most items ship UPS Ground or USPS Priority Mail. Hazardous materials (flammable, corrosive or oxidizer products) ship UPS Ground only and are not eligible for USPS, expedited, overnight or air shipping.
- Discounted UPS overnight rates available on non-hazardous items
- Questions? Call us at 800-248-6130
Watch: how to use it
- 1 · PrepClean, corrected surface (e.g. Surface Prep spray).
- 2 · ApplyApply as the product label directs.
- 3 · FinishFollow the label for removal and cure.
- 4 · MaintainWash with a gentle boat soap such as Pure Clean. Top up with Replenish.
Why pros use it
Finish
High gloss, hydrophobic; easy residual removal
Durability
Up to 3–6 months (Florida sun average; reapply on that cycle)
Chemistry
SiO2 resins + UV blockers
Prep to protect
The Starke way to lock in a corrected finish.
- WashWash with a gentle boat soap such as Pure Clean.
- CorrectStarke compounds/polishes as needed (e.g. Triple P prep polish).
- PrepStarke Surface Prep alcohol spray to remove oils.
- ProtectApply the Starke coating or sealant as its label directs.
Suggested order. Always follow the product label.
Complete the Starke system
Prep, protect and maintain
Starke Surface Prep Alcohol SprayPrep before sealing$19.99
Starke Triple P Ceramic Prep PolishPrep polish$43.99
Starke Replenish Silica SpraySiO2 maintenance$29.99
Starke Pure Clean Boat SoapCoating-safe wash$15.99Specs
| Sizes | 16 oz. / 32 oz. / 128 oz. |
|---|---|
| Protection duration | Up to 3–6 months (Florida sun average; reapply on that cycle) |
| Application method | DA polisher preferred · thin coat; foam pad speed 1/2 (product page) or microfiber pad DA speed 2 (light-color guide); hand apply possible but thicker lay-down is harder to remove |
| Flash/dwell time | 20–30 minutes minimum for SiO2 absorption (can sit overnight) |
| Reapply | Every 3–6 months |
| Surfaces | Marine paint and gel coat |
| Climate | Warm and cold climates |
| Brand | Starke Yacht Care |
FAQ
How long does it last?
Up to 3–6 months (Florida sun average; reapply on that cycle)
How do I apply it?
DA polisher preferred: 4 pea-sized drops on a microfiber or foam pad, DA speed 1–2, one thin even coat in ~2–3 sq ft sections. Hand application is possible, but a thicker lay-down is harder to remove.
How long before I remove it?
Allow 20–30 minutes dwell so SiO2 can absorb (overnight is still removable), then buff with a clean microfiber.
What surfaces is it for?
Marine paint and gel coat
Reviews
5.0★★★★★22 reviews
Overall rating: 5.0 / 5 from 22 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
Starke Hyper Hold Pro
"Went in very smooth and took little effort to wipe off greatly improved the gloss of our awlgrip."
Hiper hold pro
"This sealant is the best protection ever used for boats. Even on my truck makes a huge difference."
So far great!
"Went on easy and removed without much residue, Which is what I look for in my detail products."
Looks great!
"absolutely stunning shine. Too soon to know about how long it lasts, but I'm very impressed so far. Looks great, easy on and off."
Hhp
"Very good, love the easy wipe off & amazing shine. Customers love it. I actually use it mostly on vehicles."
Motorhome detailing
"Used Starke Hyper Hold on my Motorhome. Went on easily in full sunlight,looks great. Highly recommend."
Worth every penny
"Listen if you’re looking for a remarkable , and has the protection you need from these Harsh elements. These is your “ Wax Sealant “. Wow I’m blown away with its uses !"
Great product
"Long lasting and extremely easy to use"
Works great
"Easy to use. Great shine."
Q&A
Detailer or boat yard? Get MDSC Pros pricing.
Starke Hyper Hold Pro SiO2 Polymer Sealant16 oz. · $38.99
